How to fix canon mx922 b200 error?

The Canon MX922 B200 error code is a printer error that happens when the printer cannot read the ink cartridge. This can be caused by a few things, such as a dirty contact, a defective cartridge, or a problem with the printer itself. If the error persists, you may need to contact Canon customer service for further assistance.

You are here because you have a question about:

• canon mx922 error code b200
• canon mx922 b200 error

• Clean the print head
• Check for any foreign objects in the printer
• Perform a power cycle
• Update the printer drivers
• Use the Canon PRINT Inkjet/SELPHY app
• Check the ink levels

1. Clean the print head

1. Remove the print head cover by gently lifting the two tabs and sliding it off
2. Lift up the front of the head and remove the print head cartridge
3. Pour isopropyl alcohol into a cup and set it next to the head.
4. With a clean cloth, wipe the entire print head surface clean.
5. Replace the print head cartridge and slide the cover back on
6. Replace the front of the head and reattach the tabs

2. Check for any foreign objects in the printer

1. Remove any obstructions from the printer's print path.
2. Disconnect the printer's power cord.
3. Open the printer's cover.
4. Inspect the print head and print drum for any foreign objects.
5. Remove any foreign objects from the print head and print drum.
6. Reconnect the printer's power cord.
7. Replace the print head if necessary.
8. Replace the print drum if necessary.

3. Perform a power cycle

1. Remove the battery and memory card from the camera.
2. Hold down the power button for two seconds to turn off the camera.
3. Wait thirty seconds and then connect the camera to the power supply.
4. Turn on the camera and wait for the screen to turn on.
5. Press the menu button and then select the option to power off the camera.
6. Remove the memory card and battery and then press the power button to turn off the camera.
7. Wait thirty seconds and then remove the memory card and battery.
8. Hold down the power button for two seconds to turn on the camera.
9. Wait for the camera to start up and then press the menu button.
10. Select the option to reset the camera.
11. Follow the on-screen instructions.

4. Update the printer drivers

1. Open "Printer Driver Updates" application in your computer.
2. Choose your operating system from the list and click on the "Update Driver" button.
3. Choose "Canon MX922 B200 series" from the list of devices and click on the "Update" button.
4. Follow the on-screen instructions.

5. Use the Canon PRINT Inkjet/SELPHY app

1. Launch the Canon PRINT Inkjet/SELPHY app.
2. Tap on the Menu button.
3. Select the Settings option.
4. Under the Printer section, select the Mx922 b200.
5. Tap on the error message that you are experiencing.
6. Select the Fix option.
7. Follow the on-screen instructions.

6. Check the ink levels

1. Go to "Menu" -> "Printer Settings" -> "Ink Levels"
2. Check the ink levels and if needed, refill the ink cartridges.
3. If the ink levels are still not correct, then the problem may be with the printer itself and you will need to take it to a technician to fix it.

If the answers above didn't work then you should also try:

1. Run the printer through a cleaning cycle.
2. Replace the ink cartridges.
3. Contact Canon support.