The Canon MX922 Support Code B200 indicates that there is a problem with the printer's ink system. This error can occur for a variety of reasons, such as an empty ink cartridge, a clogged ink cartridge, or a defective ink cartridge. It is recommended that you try replacing the ink cartridge or cleaning the ink cartridge before replacing the entire ink system.
Other common searches for this error include:
- canon printer mx922 error code b200
- canon mx922 support code b200
1. Check for any obstructions in the printer's carriage path
- Open the printer's cover.
- Inspect the print head and carriage.
- Check the print cartridge and print head.
- Clean the print head and carriage if necessary.
- Check for obstructions in the printer's carriage path.
- If necessary, remove any obstructions and try printing again.
2. Remove and re-install the ink cartridges
- Remove the ink cartridges from the printer.
- Clean all contacts on the printer head and print head carriage with rubbing alcohol.
- Install the new ink cartridges and align them correctly.
- Replace the print head carriage.
- Replace the ink cartridges.
- Re-install the printer.
3. Run the print head cleaning utility
- Go to the Canon website and download the print head cleaning utility.
- After you have downloaded the utility, unzip it to a location on your computer.
- Double-click on the print head cleaning utility icon.
- Follow the on-screen instructions to run the utility.
- After the utility has finished running, click on the "Close" button.
- Restart your Canon printer.
4. Perform a power cycle of the printer
- Unplug the printer from the power source.
- Reconnect the power cord to the printer and plug the power cord into an outlet.
- Wait 10 seconds.
- Turn on the printer by pressing the power button.
- Wait until the printer finishes restarting.
- Check the Canon MX922 support code b200 if it is fixed.
Some users might also have success with the following opitons:
- Update the printer's firmware.
- Contact Canon support.