This error code happens when the hardware device is not connected to the computer. This can be due to a number of reasons, including a loose connection, a bad connection, or a problem with the device itself. If the hardware device is not properly connected to the computer, it will not be able to communicate with the computer and will not be able to function properly.
Users typically search for a solution by asking about:
- error code 45
- code 45 printer error
- currently, this hardware device is not connected to the computer. (code 45)
1. Restart the computer and try again
- Hold down the power button for 10 seconds to restart the computer.
- If the computer does not turn on or you are not able to access the computer, try to connect the hardware device to the computer using the provided cables.
- If the hardware device is not connected to the computer, try to connect the hardware device to another computer using the provided cables.
- If the hardware device is still not connected to the computer, try to connect the hardware device to an electrical outlet using the provided cables.
- If the hardware device is still not connected to the computer, try to connect the hardware device to the computer using a USB cable.
2. Check the connection of the device and make sure it is secure
- Expand Network Adapters
- Right-click the Ethernet adapter and select Properties
- On the General tab, make sure that the Status is set to Connected and the Local Area Connection Type is set to Ethernet.
- Click OK to close the Properties window.
- If the Status is not set to Connected, right-click the Ethernet adapter and select Properties
- On the General tab, click the Status button and then change the Status to Connected.
- If the Local Area Connection Type is not set to Ethernet, click the Local Area Connection Type button and then change the Connection Type to Ethernet.
- Click OK to close the Properties window.
3. Unplug the device and plug it back in
- Remove the battery.
- Disconnect the power cable.
- Reconnect the power cable.
- Turn on the device.
- If the device does not work, try to reset it.
4. Update the driver for the device
To update the driver for the device, follow these steps: -Open the Device Manager -Locate the hardware device that is not connected to the computer and right-click on it -Select Update Driver from the menu that is displayed -Follow the on-screen instructions to install the new driver
5. Delete the device and reinstall it
The steps to delete and reinstall the device vary depending on the hardware. In some cases, you may need to use the Windows 10 Recovery Environment to delete and reinstall the device. In other cases, you may need to use a USB cable to connect the device to the computer and use the Windows 10 Recovery Environment to delete and reinstall the device.
6. Run the Windows Hardware and Devices Troubleshooter
- Open the Windows Hardware and Devices Troubleshooter.
- Select the hardware device that you are trying to fix.
- Click on the "Troubleshoot" button.
- Select the "Connect" option.
- If the hardware device is not connected to the computer, the Troubleshooter will try to find the device and will display the following message. If the device cannot be found, the Troubleshooter will offer to install the drivers for the device.
- Click on the "Next" button.
- Select the "Repair" option.
- Follow the on-screen instructions.
If you didn't find success with an option above, then try:
- Contact the manufacturer of the device.