How do you fix an E1 error code on a Whirlpool washer?

The E1 error code on a Whirlpool washer indicates that the washer is not draining properly. This can be caused by a clogged drain, a faulty drain pump, or a problem with the washer's control board. If the washer is not draining properly, it will not be able to spin the clothes dry.

People like you are also looking for:

• whirlpool e1 error code
• e1 error code whirlpool washer

• Check the electrical panel for a blown fuse or tripped circuit breaker
• Inspect the washer’s power cord for damage
• Verify that the washer is plugged into a live electrical outlet
• Press the washer’s RESET button
• Unplug the washer and plug it back in

1. Check the electrical panel for a blown fuse or tripped circuit breaker

1. Open the front panel of the washer and identify the circuit that is blown or tripped.
2. Check the breaker or fuse for blown or tripped. If it is blown, replace the breaker or fuse.
3. If the circuit is not blown or tripped, then the problem may be with the wiring in the washer. Refer to the wiring diagram in the owner’s manual to troubleshoot the issue.

2. Inspect the washer’s power cord for damage

1. Look for any frayed or damaged cords.
2. Check for any signs of electrical burns or sparks.
3. Inspect the cord for any signs of wear or tear.
4. Check for any kinks or bends in the cord.
5. Check for any signs of damage to the connector or wiring.

3. Verify that the washer is plugged into a live electrical outlet

1. Verify that the washer is plugged into a live electrical outlet.
2. If the washer is not plugged into a live electrical outlet, check the outlet to ensure that it is working and properly grounded.
3. Verify that the washer's power cord is properly plugged into the electrical outlet.
4. Verify that all of the washer's electrical connections are properly made.
5. If the washer still does not work, replace the washer's power cord.

4. Press the washer’s RESET button

1. Open the front of the washer.
2. Find the reset button on the control panel.
3. Push the reset button in to reset the washer.
4. If the error code remains, consult your owner’s manual or call whirlpool’s customer service line.

5. Unplug the washer and plug it back in

1. Open the front of the washer.
2. Lift the front lip of the top panel and remove the two screws that hold the panel in place.
3. Lift the panel off of the washer.
4. Look for the power cord plug and unplug it from the wall outlet.
5. Reconnect the power cord to the wall outlet.
6. Reinstall the panel onto the washer.
7. Replace the screws that hold the panel in place.
8. Close the front of the washer.

Still not working? maybe try one of these options:

1. Call a certified appliance repair technician.