How do you fix roblox error code 522?

Error code 522 on Roblox indicates an issue with the game's server. This can be caused by the server being down for maintenance, or by a problem with the player's internet connection.

You are here because you have a question about:

• error code 522 roblox
• roblox error code 282

• Check your internet connection
• Try restarting your computer
• Check if Roblox is down
• Check your firewall settings
• Try using a different browser

1. Check your internet connection

1. Open your internet browser and type "www.roblox.com" into the address bar.
2. If you are connected to the internet, the website should load. If it does not, your internet connection may be broken.
3. If you are still having trouble connecting, try restarting your modem or router.
4. If all else fails, you can try contacting your internet service provider (ISP).

2. Try restarting your computer

1. If your computer is on, turn it off.
2. Unplug all external devices except for the keyboard and mouse.
3. Hold down the power button to turn your computer on while still holding down the "shift" key.
4. Release the power button when the screen goes black.
5. Immediately after the computer starts up, release the "shift" key and press the "reset" button.
6. Follow the on-screen instructions.

3. Check if Roblox is down

1. Navigate to the Roblox website.
2. If the Roblox website is not up, try to access it using a different browser or device.
3. If the Roblox website is still not working, check the Roblox status page.
4. If the Roblox status page shows that the website is down, try to access the Roblox website using a different browser or device.
5. If the Roblox website still does not work, check the Roblox status page for an error code.
6. If the error code shown on the Roblox status page is 522, try to fix the problem by following the instructions below.
7. If the error code shown on the Roblox status page is not 522, try to contact Roblox support.

4. Check your firewall settings

1. Open the Windows Firewall.
2. Click on Inbound Rules.
3. On the left hand side, expand the category of Networking and select Firewall Rules.
4. On the right hand side, under the Networking category, select the rule that you believe caused the error.
5. On the General tab, make sure that the Rule Type is set to Action and the Enabled box is checked.
6. If the rule is not enabled, enable it by clicking on the Enable button.
7. If the rule is enabled, make sure that the Allow traffic from list box is set to the IP address or the range of IP addresses that you want to allow access to your computer.
8. If the rule is not enabled, enable it by clicking on the Enable button.
9. If the rule is enabled, make sure that the Action list box is set to either Block or Allow.
10. If the rule is not enabled, enable it by clicking on the Enable button.
11. Click on the OK button to save the changes.

5. Try using a different browser

1. Open the "Settings" menu on your computer.
2. Click on "Internet Options."
3. Under "Advanced," click on "Browser."
4. Select the browser you want to use.
5. Click on "Advanced."
6. Under "Web Browser Settings," make sure that the "Use the same web browser for all websites" option is selected.
7. Under "Advanced," click on "Reset."
8. Click on "Reset."
9. Click on "Close" to close the "Internet Options" window.
10. Click on "OK" to close the "Browser" window.