How to fix F1 error on Frigidaire oven?

The F1 error code on a Frigidaire oven indicates that there is a problem with the oven's temperature sensor. This error can be caused by a number of things, including a faulty sensor, a loose wire, or a problem with the oven's control board. If the error code is displayed, it is important to troubleshoot the problem to determine the cause. In most cases, the F1 error can be fixed by a qualified technician.

You are here because you have a question about:

• frigidaire f1 error code
• frigidaire stove f1 error code
• f1 error code oven
• f1 error on frigidaire oven

• Check the power supply to the oven
• Check the wiring to the oven
• Check the oven control panel
• Check the oven sensor
• Check the oven igniter
• Check the oven gas valve

1. Check the power supply to the oven

1. Check that the power cord is securely plugged into the wall outlet.
2. Check that the power switch is turned on.
3. Check the circuit breaker or fuse box to make sure the circuit is not tripped or blown.
4. If the power cord is plugged into an outlet with a switch, make sure the switch is turned on.
5. If the oven is hardwired, check the house fuse or circuit breaker.

2. Check the wiring to the oven

1. Check the wiring to the oven. Make sure that the connection is tight and secure.
2. Inspect the wiring for any signs of damage. If there are any damaged wires, replace them with new ones.
3. Check the oven's control panel. Make sure that all of the buttons are in the correct positions.
4. If the oven still displays the f1 error, replace the oven's control panel.

3. Check the oven control panel

If your oven is displaying an F1 error code, it means that there is a problem with the oven control panel. To fix this, you will need to check the control panel to see if it is loose or damaged. If the panel is loose, you will need to tighten the screws that hold it in place. If the panel is damaged, you will need to replace it.

4. Check the oven sensor

1. Check the wiring to the oven sensor. Make sure that the wires are not loose and that there is no damage to the wires.
2. Check the oven sensor itself. Make sure that it is clean and free of debris.
3. Check the oven temperature. Make sure that the oven is set to the correct temperature.
4. Check the oven door. Make sure that the door is closed properly.
5. If the oven sensor is still not working, replace it with a new one.

5. Check the oven igniter

1. First, check to make sure that the igniter is receiving power. If the igniter is not receiving power, then it will need to be replaced.
2. Next, check to see if the igniter is glowing. If the igniter is not glowing, then it may be defective and will need to be replaced.
3. Finally, check to see if the igniter is producing enough heat. If the igniter is not producing enough heat, then it will need to be replaced.

6. Check the oven gas valve

If you have an error code on your Frigidaire oven that says "F1," it means that there is a problem with the oven gas valve. To check the oven gas valve, first make sure that the power is turned off to the oven. Then, remove the oven door and unscrew the two screws that hold the oven gas valve in place. Pull the oven gas valve out and inspect it for any damage. If the oven gas valve is damaged, you will need to replace it. If the oven gas valve is not damaged, you will need to check the wiring to make sure that it is not loose.