How do I fix the F51 error code?

The f51 error code indicates that there is a problem with the washing machine's drain pump. This error code can be caused by a clog in the drain pump, a problem with the drain pump itself, or a problem with the washing machine's draining system. If the problem is a clog, it may be possible to clear it by unplugging the washing machine and running a vinegar and water solution through the machine's drainage system. If the problem is with the drain pump itself, it may need to be replaced. If the problem is with the washing machine's draining system, it may need to be repaired or replaced.

You are here because you have a question about:

• cabrio washer error code f51
• f51 error code

• Check the door switch for proper operation
• Check the drive belt for proper tension
• Check the wash pump for proper operation
• Check the drain hose for proper connection

1. Check the door switch for proper operation

1. Verify that the door switch is operational by pressing and releasing the switch.
2. If the door switch is not operational, replace the door switch.

2. Check the drive belt for proper tension

1. Locate and remove the drive belt.
2. Measure the belt tension and compare it to the recommended tension.
3. Replace the belt if necessary.

3. Check the wash pump for proper operation

1. Verify that the water supply is working properly.
2. Verify that there is no clog in the wash pump.
3. Verify that the wash pump is properly installed and connected to the water supply.
4. Verify that the wash pump is turned on.
5. Verify that the wash pump is operating at the correct speed.
6. Verify that the wash pump is properly draining.
7. Verify that the wash pump is properly cleaning the water.
8. Verify that the wash pump is properly flushing the waste water.
9. Verify that the wash pump is properly draining the wash water.
10. If the check fails, replace the wash pump.

4. Check the drain hose for proper connection

1. Turn off the water supply to the sink.
2. Check the faucet for proper connection and turn on the water.
3. Check the drain hose for proper connection by attempting to connect it to the drain in the sink.
4. If the connection is correct, check to see if the hose is properly plugged into the faucet. If the hose is not properly plugged into the faucet, tighten the hose connection.
5. If the connection is correct, turn off the water supply to the sink and re-check the faucet for proper connection. If the faucet is not properly connected, the f51 error code will be displayed. In order to fix the error, the connection must be made properly.

If you didn't find success with an option above, then try:

1. Check the water inlet valve for proper operation