There are a variety of error codes that can appear on an LG TV. These codes indicate different problems that can occur. For example, the code "LG01" indicates a problem with the TV's main board, while the code "LG07" indicates a problem with the TV's backlight. Other codes indicate different problems, such as a problem with the TV's HDMI input or a problem with the TV's speakers.
Some error codes can be fixed by the user, while others require the assistance of a qualified technician. For example, the error code "LG01" can often be fixed by resetting the TV. However, the error code "LG07" usually requires the replacement of the TV's backlight.
Error codes can be frustrating, but they can also be a helpful troubleshooting tool. If you see an error code on your LG TV, take a note of the code and try to find a solution online. If you can't find a solution, contact an LG customer service representative for assistance.
You are here because you have a question about:
- lg tv error code 106
- lg tv error code -137
- lg tv error codes
1. Check the power supply and make sure the TV is plugged in correctly
- Turn off the TV and unplug the power cord from the wall
- Check to see if the TV has power by pressing the power button on the TV
- If the TV does not have power, plug the power cord back into the wall and turn on the TV
- If the TV still does not have power, check the power supply by plugging in a different power cord and checking to see if the TV powers on
- If the TV still does not have power, unplug the power cord from the TV and check to see if the TV turns on when plugged into the USB port on a computer
- If the TV still does not have power, check the power supply by plugging in a different power cord and checking to see if the TV powers on
- If the TV still does not have power, replace the power supply
2. Check the input source and make sure it is set to the correct input
- Press the "input" button on the remote control and make sure that the input source is set to "TV."
- Press the "menu" button on the remote control and make sure that the input mode is set to "TV."
- Press the "input" button on the TV and make sure that the input source is set to "TV."
- Press the "menu" button on the TV and make sure that the input mode is set to "TV."
- Check the signal input on the TV. If the input signal is good, the TV will show a blue screen with the error code. If the input signal is not good, the TV will show a red screen with the error code.
- If the input signal is good, try the following steps:
- Change the input source on the TV
- Change the input mode on the TV
- Reboot the TV
3. Check the cable connection and make sure it is secure
- Verify that the power cord is firmly plugged into the wall outlet and the TV.
- Check if the TV is in standby mode.
- Check to see if the TV is receiving a proper signal.
- Try to connect the TV to another TV or an external device to check if the problem is with the TV.
- If connecting to other TVs or devices does not solve the problem, then try replacing the TV’s cable or connecting the TV to an unencrypted network.
- If all other methods fail, then the TV may need to be replaced.
Still not working? maybe try:
- Check the picture settings and make sure they are set correctly.
- Check the sound settings and make sure they are set correctly.
- Reset the TV to its factory settings.
- Contact LG customer support for further assistance.