Home > Dns

How to Fix Common DNS Error Codes?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

Common DNS error codes include DNS_PROBE_FINISHED_NXDOMAIN, DNS_PROBE_FINISHED_NO_INTERNET, and DNS_PROBE_FINISHED_BAD_CONFIG. These error codes happen when the DNS server is not able to resolve the domain name. DNS_PROBE_FINISHED_NXDOMAIN happens when the DNS server cannot find the requested domain name. DNS_PROBE_FINISHED_NO_INTERNET happens when the DNS server is not able to connect to the internet. DNS_PROBE_FINISHED_BAD_CONFIG happens when the DNS server is not properly configured.

1. DNS_PROBE_FINISHED_NXDOMAIN

To fix common Dns error codes, perform the following steps:

  1. Verify the domain name is correct.
  2. Try the validation procedure again.
  3. If the problem persists, check the DNS server logs.
  4. If the problem persists, check the network connectivity.
  5. If the problem persists, check the server hardware.

2. DNS_PROBE_FINISHED_NO_INTERNET

  1. If DNS_PROBE_FINISHED_NO_INTERNET is returned, then check the internet connection and DNS settings.
  2. If the internet connection is working properly, then check the DNS settings.
  3. If the DNS settings are correct, then check the network connection.

3. DNS_PROBE_FINISHED_BAD_CONFIG

In order to fix common DNS error codes, DNS_PROBE_FINISHED_BAD_CONFIG must be called. This function will attempt to fix any errors that were detected while probing the DNS server. If the error was caused by a bad configuration, DNS_PROBE_FINISHED_BAD_CONFIG will attempt to correct it.

4. DNS_PROBE_FINISHED_NODATA

The DNS_PROBE_FINISHED_NODATA error code is returned when the DNS server cannot find the requested DNS server or resource record. The following steps can be used to fix this error:

  1. Check the DNS server's configuration.
  2. Verify that the DNS server has the correct IP address and port number.
  3. Verify that the DNS server is configured to use the correct zone suffixes.
  4. Verify that the DNS server is configured to resolve the requested DNS server or resource record.

If you didn't find success with an option above, then try:

  1. Clear your DNS cache:
  2. For Windows:
  3. Press the Windows key + R to open the Run window.
  4. Type "ipconfig /flushdns" and press Enter.
  5. Restart your computer.
  6. For Mac:
  7. Open Terminal.
  8. Type "sudo killall -HUP mDNSResponder" and press Enter.
  9. Restart your computer.
  10. Change your DNS settings:
  11. For Windows:
  12. Press the Windows key + R to open the Run window.
  13. Type "control /name Microsoft.NetworkAndSharingCenter" and press Enter.
  14. In the left pane, select "Change adapter settings".
  15. Right-click on your active network connection and select "Properties".
  16. Select "Internet Protocol Version 4 (TCP/IPv4)" and click "