The kenmore elite refrigerator error code er ff indicates that the refrigerator has detected a problem with the fan circuit. This error code can happen for a variety of reasons, including a problem with the fan itself, a problem with the wiring, or a problem with the control board. If the code is displayed, it is important to troubleshoot the problem so that it can be fixed.
- Check the refrigerator's power supply and make sure it is plugged into a working outlet
- Check the refrigerator's door gasket and make sure it is sealing properly
- Check the refrigerator's evaporator fan and make sure it is working properly
- Check the refrigerator's condenser fan and make sure it is working properly
- Clean the refrigerator's coils and make sure they are free of dirt and debris
- Call a Kenmore Elite refrigerator repair technician to diagnose and repair the problem
1. Check the refrigerator's power supply and make sure it is plugged into a working outlet
- Check the outlet by plugging in another appliance to make sure it is working.
- Check the power supply by pressing the power button and checking the light.
- If the power supply is not working, replace it.
2. Check the refrigerator's door gasket and make sure it is sealing properly
- Open the refrigerator door.
- Check the gasket on the door. If it is damaged or not properly sealing, replace the gasket.
- Close the door.
- Check to see if the error code has changed.
3. Check the refrigerator's evaporator fan and make sure it is working properly
- Open the refrigerator and inspect the evaporator fan for any obstructions. If there are any obstructions, remove them using a vacuum cleaner or a small brush.
- Inspect the evaporator fan motor for any damage. If there is damage, replace the fan motor.
- Check the power supply to the evaporator fan motor. If the power supply is not working, replace the power supply.
- Check the wiring to the evaporator fan motor. If the wiring is not working, replace the wiring.
4. Check the refrigerator's condenser fan and make sure it is working properly
- Open the refrigerator door and check to see if the condenser fan is spinning. If it is not, then you will need to replace the fan.
- If the fan is spinning, then you will need to disconnect the power to the fan and check the wiring. If the wiring is bad, then you will need to replace the fan.
- If the wiring is good, then you will need to check the fan motor. If it is not working, then you will need to replace the fan.
5. Clean the refrigerator's coils and make sure they are free of dirt and debris
- Open the refrigerator and locate the coils on the back.
- Clean the coils with a damp cloth or a can of compressed air.
- Make sure the coils are free of dirt and debris.
- Close the refrigerator and test the coils.
6. Call a Kenmore Elite refrigerator repair technician to diagnose and repair the problem
-Open the refrigerator door and remove any food or drinks -Check the power cord for any issues and any frayed or broken wires -Remove the front panel of the refrigerator and take a look at the control board, motors, and cooling coils -Replace any parts that are malfunctioning and fix any wiring issues -Reinstall the front panel and test the refrigerator to see if the problem has been resolved