As washing machines have gotten high tech so have their errors. We help to air out the issues with these common error codes.
The Samsung washer error code is a code that is used to indicate that there is an error with the washer. This code can be caused by a variety of different things, such as a problem with the washer itself, a problem with the washing machine's water supply, or a problem with the electricity supply to the washer.
Other common searches for this error include:
- samsung error code
- samsung washer error codes
![Samsung washer error code UE]()
Washing MachineSamsung washer error code UESamsung washer error code UE is an error that usually appears when the washing machine has detected an unbalanced load. It may also stop the machine when it is on spin cycle.![samsung WASHER]()
samsung wash machine error codeHow do you fix Samsung washing machine error code?If your Samsung washing machine is displaying an error code, it means there is a problem with the washing machine
![4E SAMSUNG washer]()
samsung washer 4e codeHow to fix Samsung washer 4E code?The Samsung washer 4e code is an error code that indicates that the washer is not draining properly![with SAMSUNG washer]()
samsung washer le codeHow do you fix a Samsung washer with an LE code?The "LE" code on a Samsung washing machine indicates a problem with the motor
1. Check the inlet hoses to ensure they are not kinked or clogged
- Turn off the water supply to the washer.
- Inspect all the inlet hoses for any kink or obstruction. If there is an obstruction, use a pipe cleaner or a plunger to clear the obstruction.
- Reconnect the inlet hoses and turn on the water supply to the washer.
- Wait 10 minutes for the water to flow through the washer.
- Check the water level in the washer. If the water level is low, refill the washer.
- Check the washer for any error codes. If there are any error codes, fix them.
2. Clean the inlet hose screens
- Turn off the water supply to the washer.
- Open the inlet hose screen cover.
- Remove the inlet hose screen.
- Clean the screen with a damp cloth.
- Replace the inlet hose screen.
- Close the cover.
- Turn on the water supply to the washer.
3. Inspect the door seal and replace it if it is damaged
- Remove the door seal by unscrewing the four screws that hold it in place. Be sure to wear gloves to protect your hands.
- Inspect the door seal for any tears or holes. If there are any holes, replace the seal.
- Reinstall the door seal by screwing it in place. Be sure to tighten the screws evenly.
- Replace the four screws that hold the door seal in place.
- Test the door seal by closing and opening the door several times. If the seal is still damaged, replace the door.
4. Clean the drain pump filter
1.Turn off the water supply to the washer. 2.Remove the front panel of the washer. 3.Remove the drain pump filter. 4.Rinse the filter with water. 5.Replace the filter and replace the front panel of the washer.
5. Clean the spin tube
- Turn off the washer and unplug it from the electrical outlet.
- Remove the top panel by gently prying it off of the machine.
- Remove the inner tub by gently prying it off of the machine.
- Remove the spin tube by unscrewing it from the front of the machine.
- Clean the inside of the spin tube with a damp cloth or vacuum cleaner.
- Reinstall the spin tube by screwing it back onto the front of the machine.
- Replace the top panel and plug the washer back into the electrical outlet.
6. Check the drain hose for kinks or clogs
- Open the front cover of the washer.
- Check the drain hose for kinks or clogs. If there are any, use a hose clamp to fix them.
- Check the water level in the washer. If it is low, add water.
- Close the cover and test the washer.
If the answers above didn't work then you should also try:
- Replace the drain hose if it is damaged.
- Clean the washer tub.
- Run a maintenance cycle.