How to fix code 34 Sprint?

Code 34 is a sprint error code that can occur for a variety of reasons. The most common cause is a problem with the connection between the Sprint network and the device. Other causes can include a problem with the device itself or a problem with the Sprint account.

People like you are also looking for:

• sprint error code 34
• code 34 sprint

• Check the data cable for any damage or loose connections
• Check the SIM card for any damage or dirt
• Factory reset the phone

1. Check the data cable for any damage or loose connections

1. Check the data cable for any damage or loose connections.
2. If there are any loose connections, tighten them using a wrench.
3. If there are any damaged cables, replace them with new ones.

2. Check the SIM card for any damage or dirt

1. If the phone is off, press and hold the power button until the phone turns on and displays the Samsung screen.
2. Tap on "Settings."
3. Scroll down to "Phone Info."
4. Tap on " SIM."
5. If the "SIM Status" says "No damage," then the SIM card is in good condition. If the "SIM Status" says "Damage," then the SIM card needs to be replaced.
6. If the "SIM Status" says "No damage," then the SIM card is in good condition. If the "SIM Status" says "Damage," then the SIM card needs to be replaced.

3. Factory reset the phone

Remove the battery cover by pushing down on the sides and pulling up. Gently insert a flat head screwdriver into the slits on either side of the battery cover and pop it off. Tip: use a paper towel to help absorb any debris that falls out of the phone. Reset phone: hold down the power button and volume down button at the same time until the phone turns off. Now hold down the power button and volume up button until the phone turns on. You will see a screen that says “Factory Reset.” Press the volume down button to select “Yes” and press the power button to reset.