How to fix New England pellet stove error codes?

If your New England Pellet Stove is displaying an error code, it is likely due to an issue with the stove's combustion blower. The combustion blower is responsible for circulating air through the fire chamber, and if it is not working properly, the stove will not operate correctly. There are a few different things that can cause the combustion blower to fail, such as a clogged filter or a faulty motor. If you are seeing an error code on your stove, it is best to contact a qualified technician for assistance.

Other common searches for this error include:

• englander pellet stove error code 5 u
• new england pellet stove error codes

• Check the pellet stove's hopper for any blockages
• Clean or replace the pellet stove's igniter
• Empty the ash pan and clean the stove's combustion chamber
• Check for any blockages in the stove's flue pipe
• Have the pellet stove serviced by a certified technician

1. Check the pellet stove's hopper for any blockages

1. Open the front door of the pellet stove.
2. Look inside the hopper to see if there are any blockages.
3. If there are blockages, use a broom to clear them out.
4. Close the front door of the pellet stove.
5. Turn on the pellet stove.
6. Wait until the pellet stove is heating up.
7. Check the pellet stove's temperature.
8. If the temperature is not correct, fix the pellet stove error codes.

2. Clean or replace the pellet stove's igniter

1. Remove the front cover of the pellet stove.
2. Remove the igniter assembly.
3. Clean the igniter assembly using a non-abrasive cleaning agent.
4. Replace the igniter assembly if necessary.

3. Empty the ash pan and clean the stove's combustion chamber

1. Remove the ash pan by unscrewing the three screws located at the base.
2. Lift the ash pan and place it on a clean surface.
3. Pour a pot of water into the ash pan and turn the stove off.
4. Use a spoon to remove all the ashes and clumps from the bottom of the stove.
5. Pour a pot of water into the ash pan and turn the stove on to full heat.
6. Use a broom to clean the combustion chamber.
7. Pour a pot of water into the ash pan and turn the stove off.
8. Remove the ash pan by unscrewing the three screws located at the base.
9. Replace the ash pan by screwing it back in place.
10. Turn the stove on to full heat and wait until the water boils.
11. Remove the ash pan by unscrewing the three screws located at the base.
12. Pour a pot of water into the ash pan and turn the stove off.
13. Use a vacuum cleaner to clean the combustion chamber.
14. Replace the ash pan by screwing it back in place.
15. Turn the stove on to full heat and wait until the water boils.
16. Remove the ash pan by unscrewing the three screws located at the base.
17. Pour a pot of water into the ash pan and turn the stove off.
18. Use a vacuum cleaner to clean the combustion chamber.
19. Replace the ash pan by screwing it back in place.
20. Turn the stove on to full heat and wait until the water boils.
21. Remove the ash pan by unscrewing the three screws located at the base.
22. Pour a pot of water into the ash pan and turn the stove off.
23. Use a vacuum cleaner to clean the combustion chamber.
24. Replace the ash pan by screwing it back in place.
25. Turn the stove off and unplug the stove.

4. Check for any blockages in the stove's flue pipe

1. Open the damper that controls the flow of air into the stove. This can be found on the front or the side of the stove.
2. Look for any debris or blockages in the flue pipe. If you find any, use a wire brush to clear them away.
3. Re-open the damper and check for proper air flow. If there is still a problem, call a professional to fix the stove.

5. Have the pellet stove serviced by a certified technician

1. Identify the error code and its associated description.
2. Call a certified technician to service the pellet stove.
3. Have the technician diagnose and fix the error code.
4. Receive a report of the technician's findings.