Samsung fridge error code 41 is caused by a problem with the evaporator fan. This error code can be caused by a variety of things, but the most common cause is a dirty or blocked evaporator fan. If the evaporator fan is not working properly, it can cause the fridge to overheat and the ice to melt.
Users typically search for a solution by asking about:
- error code 41 samsung fridge
- samsung error code 41
- samsung refrigerator error code 41
- samsung fridge error code 41
- Check the fridge's power supply and make sure it is properly plugged in
- Check the fridge's circuit breaker and reset it if necessary
- Check the fridge's thermostat and make sure it is set to the correct temperature
- Clean the fridge's coils and make sure there is no dust or debris blocking them
- Call a professional technician to service the fridge
1. Check the fridge's power supply and make sure it is properly plugged in
To check the power supply of your fridge, start by unplugging the power cord from the wall outlet. If the power light on the fridge is on, the power supply is working and you do not need to take any other action. If the power light is off, or if the fridge does not start, then the power supply may be defective and you should replace it. To check the power supply, you will need a voltmeter. Turn the power off to the fridge and plug in the voltmeter. The voltage should be between 12 and 18 volts. If the voltage is lower than 12 volts or higher than 18 volts, the power supply may be defective and you should replace it. If the power supply is working and the voltage is within the correct range, you can check to see if the power is properly plugged in by plugging in the voltmeter into one of the other electrical outlets in your home and checking the voltage. If the voltage is correct, then the power supply is properly plugged in. If the voltage is not correct, then the power supply may be defective and you should replace it.
2. Check the fridge's circuit breaker and reset it if necessary
- Open the fridge and locate the circuit breaker.
- Verify that the circuit breaker is in the off position.
- Reset the circuit breaker by turning it to the on position and wait for the refrigerator to reset.
3. Check the fridge's thermostat and make sure it is set to the correct temperature
- Look at the thermostat
- If it is set to the correct temperature, the error code should not be displayed
- If the thermostat is not set to the correct temperature, adjust it to the correct temperature and then try to fix the error code again
4. Clean the fridge's coils and make sure there is no dust or debris blocking them
- Remove the door of the fridge.
- Remove the coils from the back of the fridge.
- Check to see if there is any dust or debris blocking the coils. If so, remove the debris using a vacuum cleaner.
- Reinstall the coils and door.
- Test the fridge to see if the error code has been fixed.
5. Call a professional technician to service the fridge
- Verify the error code.
- Check the power supply to the fridge.
- Check the cooling system.
- Check the water supply to the fridge.
- Check the freezer compartment.
- Check the door gasket.
- Check the compressor.
- Check the wiring.
- Check the insulation.
- Check the temperature sensor.