This error code means that the washing machine is not draining or spinning properly. There are a few possible reasons for this, including a clogged drain, a problem with the washing machine's pump, or a problem with the washing machine's control panel. If the washing machine is not draining properly, it is important to check the drain for any blockages. If the washing machine is not spinning properly, it is important to check the washing machine's pump for any problems. If the washing machine's control panel is not working properly, it is important to check the washing machine's manual for troubleshooting steps.
Users typically search for a solution by asking about:
- samsung washing machine not spinning no error code
- samsung washing machine not draining or spinning
1. Check the drain hose for any blockages
- Open the front cover on the washing machine.
- Look for any blockages in the drain hose. If you see any blockages, clear them using a plunger.
- Reconnect the drain hose to the washing machine.
- Turn on the washing machine and check to see if the problem has been fixed.
2. Check the washing machine filter for any blockages
The first step to take if the washing machine is not draining or spinning is to check the filter. Remove the filter cover and look for any blockages. If there are any, clean them out with a vacuum cleaner. Replace the filter and replace the cover.
3. Clean the pump filter
- Turn off the machine and unplug it.
- Remove the front panel by pressing on the two clips at the top and then pulling it off.
- Remove the filter by unscrewing the cap.
- Wash the filter in a clean water and detergent solution.
- Dry the filter with a clean cloth.
- Replace the filter and reattach the front panel.
- Turn on the machine and check the filter for blockages. If the filter is blocked, replace it.
4. Clean the drain pump
- Remove the front panel of the washer.
- Unplug the washer.
- Remove the drain pump by removing the four screws that hold it in.
- Clean the pump with a brush and detergent.
- Reinstall the pump and screws.
- Plug the washer in and test it.
5. Check the drain pump for any blockages
- Turn off the power to your washer.
- Open the front panel.
- Look for the drain pump.
- Check the drainage pipe for any blockages.
- If there are any blockages, remove them using a plunger or a vacuum cleaner.
- Reattach the drain pipe and close the front panel.
- Turn on the power to your washer.
- Check the drainage pump for any sign of damage.
Some users might also have success with the following opitons:
- Check the wash motor for any blockages
- Clean the spin basket
- Clean the tub
- Check the washing machine's spinning system